LeafBlaster Pro Gutter Guards in Jacksonville, FL

LeafBlaster Pro Gutter Guards

The Last Time You Should Ever Climb a Ladder to Clean Your Gutters

LeafBlaster Pro stainless steel micro-mesh keeps oak leaves, pine needles, palm fronds, acorns, and shingle grit out of your gutter channel. Engineered for Northeast Florida's heavy debris and 50+ inches of annual rainfall. Authorized Done Right Partner installer.

40-Year Manufacturer Warranty | Gutter Pro Lifetime Install Warranty | Done Right Partner Installer | 164+ Five-Star Reviews

What Makes LeafBlaster Pro Different

Stainless Steel Micro-Mesh

Surgical-grade stainless mesh, not plastic or aluminum screen. Will not warp, crack, or rust in Florida humidity and salt air.

Z-Bend Technology

Patented ridges lift debris off the mesh surface so wind clears it away. Less brushing, less maintenance.

Extruded Aluminum Frame

Heavy-duty frame, not flimsy folded metal. Holds up under hurricane wind loads and the weight of fallen palm fronds.

Handles Heavy Florida Rain

Engineered to pass water at full storm volume. No backsplash, no overshooting during 4-inch-per-hour downpours.

Pest and Critter Proof

Mosquitoes, wasps, lizards, birds, squirrels, and rodents stay out of the gutter channel and out of your attic.

Rainwater Harvest Certified

550-micron mesh exceeds ANSI 63-2013 rainwater harvesting standard. Water from your roof is clean enough to collect without extra pre-filtration.

Built for the Debris That Actually Falls in Northeast Florida

Most gutter guards on the market are designed for Midwest maple leaves. Florida's debris mix is completely different and requires a micro-mesh small enough to block all of it.

Live Oak Leaves

Drop year-round in Mandarin, Ponte Vedra, Avondale, Ortega

Pine Needles

Slide through standard mesh. Micro-mesh blocks them.

Palm Fronds

Common after storms. Frame strength handles the weight.

Shingle Grit

Asphalt sand that packs gutters. 550-micron mesh stops it.

LeafBlaster Pro vs Common Cheap Alternatives

Type Blocks Pine Needles Florida Lifespan Warranty
LeafBlaster Pro (what we install) Yes Lifetime 40-year manufacturer + lifetime install
Plastic mesh / screens No 2-5 years Limited or none
Foam inserts No 1-3 years None
Reverse-curve helmet Partial 10-15 years Varies
Aluminum screen guards No 5-10 years Limited

LeafBlaster Pro Pricing in Jacksonville

Final pricing depends on linear footage, roof pitch, and existing gutter condition. Free written quote after the on-site walk.

Per Linear Foot

$12 - $14

Installed cost, Jacksonville market

Typical Home

150 - 300 ft

Linear feet for most NE Florida homes

Wisetack 0% APR financing available for 12 months on installs over $3,000. Soft credit pull, no impact on your score.

Our Installation Process

A gutter guard install is only as good as the gutter underneath it. We inspect first, fix what is broken, then mount the guard properly.

01

Free On-Site Walk

Owner Albert walks every property personally. Measures linear feet, checks existing gutter condition, identifies any drainage issues.

02

Gutter Inspection First

If the underlying gutter is failing, we recommend repair or replacement before adding guards. A guard on a broken gutter is wasted money.

03

Channel Deep-Clean

Every gutter is hand-cleared and flushed before the guard goes on. New install starts on a clean slate.

04

Guard Installation

Custom-cut to your gutter size, secured with screws into the front lip and rear flange. Not snapped or slid under shingles.

05

Water Test

We run water across the guard before we leave to verify full flow into the channel and out the downspouts.

06

Warranty Registered

40-year manufacturer warranty registered in your name plus Gutter Pro lifetime install warranty documented in writing.

Is It Worth the Cost? Here Is the Math.

If your home needs quarterly cleanings at $250 each, that is $1,000 per year forever. LeafBlaster Pro typically pays for itself in 4 to 6 years on cleaning savings alone. After that, every year is free money. Plus you stop the secondary costs: fascia rot from overflow, foundation damage from misdirected water, and the personal time and risk of climbing ladders.

LeafBlaster Pro Installation Across Northeast Florida

Jacksonville, Ponte Vedra, Nocatee, St. Augustine, St. Johns, Fleming Island, Orange Park, Fernandina Beach, Amelia Island, Mandarin, San Marco, Riverside, Avondale, Ortega, Atlantic Beach, Neptune Beach, Jacksonville Beach, Arlington, Julington Creek, Oakleaf, and Middleburg.

Get Your Free LeafBlaster Pro Quote

Owner Albert walks the property. No high-pressure pitch. Written quote in 48 hours.

Book Online Call (904) 304-3199

Licensed and insured. Wisetack 0% APR financing available.

Frequently Asked Questions

LeafBlaster Pro Gutter Guards FAQ

Do gutter guards actually work?

The right gutter guard, installed correctly, dramatically reduces gutter clogging. The wrong gutter guard (cheap plastic mesh, foam inserts, or screen guards) creates more problems than it solves. Gutter Pro installs LeafBlaster Pro micro-mesh, which is engineered for the oak, pine, palm, and shingle-grit debris common in Northeast Florida.

What is LeafBlaster Pro?

LeafBlaster Pro is a stainless steel micro-mesh gutter guard system designed to block leaves, pine needles, oak tassels, shingle grit, and even sand from entering the gutter channel while letting water through. It mounts on top of any seamless aluminum or copper gutter and carries a lifetime performance warranty.

How much do gutter guards cost in Jacksonville?

LeafBlaster Pro guard installation typically runs $7 to $14 per linear foot installed in the Jacksonville market, depending on existing gutter condition, roof pitch, and access. Most homes need 150 to 300 linear feet of guard coverage. Owner Albert quotes the exact number on a free on-site walk.

Are gutter guards worth the cost in Northeast Florida?

For any home with oak, pine, or palm canopy near the roof — yes. The payback comes from eliminated quarterly cleanings (typically $200-$300 each), reduced gutter overflow during heavy storms, and longer life on the underlying aluminum. Most homeowners recoup the guard cost within 4 to 6 years on cleaning savings alone.

Will LeafBlaster Pro work with my existing gutters?

Usually yes. LeafBlaster Pro mounts on top of standard 5-inch, 6-inch, and 7-inch seamless aluminum and copper gutters. We assess the condition of the existing channel and hangers first — if the underlying gutter is failing, we recommend replacement before installing guards so the warranty is meaningful.

Do gutter guards work with heavy oak canopy?

Yes. LeafBlaster Pro is specifically engineered for heavy oak debris common in Mandarin, Arlington, Ponte Vedra, Old Ortega, and Fleming Island. The micro-mesh keeps oak tassels, leaves, and acorns out while passing water at full storm volume. You'll still want a yearly visual on top of the guard.

What warranty comes with LeafBlaster Pro?

LeafBlaster Pro carries a manufacturer's lifetime performance warranty against clogging. Gutter Pro adds our own lifetime warranty on labor and installation. If anything goes wrong with the guard or the install, we make it right — we install only what we stand behind.

Do you install gutter guards across the Jacksonville area?

Yes. We install LeafBlaster Pro across Jacksonville, Ponte Vedra, Nocatee, St. Augustine, St. Johns, Fleming Island, Orange Park, Fernandina Beach, and Amelia Island. Same crew that handles seamless gutter installs handles guard installs. Single warranty across the whole system.

Call (904) 304-3199 or request a free quote.

  • Yes—especially for homes with heavy tree cover, steep roofs, or two-story rooflines. Gutter guards prevent leaf and pine-needle clogs that cause overflow, fascia damage, and foundation water issues. Gutter Pro installs LeafBlaster Pro stainless steel micro-mesh guards.

  • Stainless steel micro-mesh guards (like LeafBlaster Pro) outperform foam, brush, and reverse-curve options for Florida conditions. The micro-mesh blocks pine needles and roof grit while letting heavy rainwater through.

  • Quality micro-mesh guards eliminate the need for routine gutter cleaning. Occasional brushing of the top of the mesh may be needed in heavily wooded Northeast Florida areas—but no more climbing ladders to scoop debris.

  • Yes—LeafBlaster Pro guards install on virtually any existing gutter system. Gutter Pro inspects your gutters first; in some cases re-pitching or replacing gutters first will give the best long-term performance.

164+ Five-Star Google Reviews  |  NDS Certified  |  Lifetime Warranty

Get Your Free On-Site Water Protection Plan

Owner Albert walks every property personally. No high-pressure pitch. No sales call. Just a clear design and a fair number, usually within 48 hours.

Most homeowners save thousands by catching foundation, fascia, and drainage issues early.

Book My Free Inspection

or call/text (904) 304-3199

Serving St. Johns County, Ponte Vedra, Nocatee, and all of NE Florida. Licensed and Insured. Wisetack 0% APR financing available.

Related gutter guard resources